Driveways, patios, slabs and repairs for Adamsville homes and businesses, built for clay soil and older homes. We also work in Hillcrest Highlands, Hillcrest Estates, Westwood Heights, the Crumly Chapel area, the Downtown and Main Street area, the Highway 78 corridor, and the Spring Street area. We are based in Hoover, a short drive from Adamsville.
Adamsville is the old railroad and coal town of western Jefferson County. It grew up around the railroad. In 1889, William Adams gave land to the railroad for a depot and a right of way, and the town was named for him. A year later, a large coal seam was found nearby. Coal mining and coke ovens made Adamsville a boom town, and the hillsides filled with mine openings. The town first became a city in 1901, gave up its charter in 1915, and came back as a city in 1953. A fire burned much of downtown in 1918, and the depot was rebuilt. Today about 4,400 people live here. Adamsville is also the hometown of Henry E. Erwin, a Medal of Honor recipient from World War II. US Highway 78 runs through town, and I-22 is close by at the Hillcrest Road exit. Most homes in Adamsville are older, single-family homes on quiet streets. Many were built in the 1950s, 1960s, and 1970s, and their driveways and patios have had decades of use. Newer homes stand in places like Hillcrest Highlands, Hillcrest Estates, and Westwood Heights. Spring Street Park and Blackwell Park give families green space close to home, and Village Creek runs near town. The ground here is the hard part. Adamsville sits on clay-rich soil, like the rest of central Alabama. Clay swells when it gets wet. It shrinks when it dries out. That movement cracks driveways, sinks patios, and shifts slabs. Near Village Creek and other low, wet spots, the ground can also stay damp, and heavy rain can wash out the ground under a slab. We build for that ground. We check the soil and drainage first. We build a strong base. We add steel reinforcement. We plan for water. Then we pour.
You get the price in writing first. We list materials, labor and prep before work starts, with no surprise fees.
You get an honest answer. Some concrete can be repaired and some should be replaced. We will tell you which makes sense.
Call us and talk directly with the person who will look at your job.
Here are the jobs Adamsville homeowners ask about most. Images are examples of the type of work.
Old, cracked driveways removed and replaced on a compacted base, with control joints and a broom finish for grip.
Simple concrete patios sized to your yard and graded so water drains away from your home.
When only part of the slab has failed, we can replace that section instead of the whole driveway.
Built on a compacted base to handle Alabama weather and daily use.
Patterns that mimic brick, stone or tile for patios, walkways and driveways.
Fixes for cracked or uneven surfaces when replacement is not needed.
Crack repair and stabilization, after we find out what is causing the movement.
Parking lots, sidewalks and floors for Adamsville businesses.
Colors, textures and finishes that give plain concrete a custom look.
Solid front and backyard steps with even, comfortable rises.
Walkways for homes and businesses, graded so water runs off.
Clean cuts for openings, repairs and sections of old concrete.
Strong pavers that lock together for patios and driveways, laid on a firm base.
A good pour starts before any concrete arrives. Here is what we look at on every visit.
We look at the soil. We look at where water goes after rain. Near Village Creek and other low, wet spots, the ground can stay damp. We plan where water should go, so it does not wash out the ground under the slab.
We compact the ground layer so it does not sink later. A weak base is a common cause of cracks.
Steel bars or mesh help the slab hold together when the ground moves.
These straight cuts give concrete a planned place to crack as it shrinks and moves.
Most patios, sidewalks and slabs are 4 inches thick. Trucks and large equipment need more.
Usually walk on it in 1 to 2 days and drive on it after about 7. Full strength takes about 28 days.
Slope and grade — Grade is how steep the ground is. A steep driveway needs a different plan than a flat one. We check the slope before we form the slab.
Typical planning ranges, not a quote.
Job
Per sq ft, installed
Plain driveway or patio, 4-inch slab
$6 to $12
Thicker reinforced slab, 5 to 6 inches
$8 to $16
Stamped or exposed aggregate
$10 to $24
What changes your price
The size of the area, ground prep, removal of old concrete, your finish, and any drainage work. Small jobs often cost more per square foot. Older slabs can also cost more, because removal takes extra work. In Adamsville, many homes were built in the 1950s, 1960s, and 1970s, and their old driveways often need a full removal first.
How long it takes
Most small jobs take a few days once work begins. Larger jobs take longer. You get the timeline before we pour.
Call or send a message. We check the soil and slope, check drainage and measure the area.
A clear price in writing, with no pressure to sign on the spot.
We prep, pour and finish, then allow for proper cure time.
We walk the job with you, clean up and explain how to care for it. We also show you the simple care: sweep it clean, seal it every 2 to 3 years, fix small cracks early, and do not park heavy loads on it before the cure time is over.
It depends on the job. The City of Adamsville handles building permits through City Hall, at 3505 Gray Ave, and the city’s site lists a Miscellaneous Building Permit. Driveways and patios are not named either way in the rules we found, so we check with the city about your address before we set a date. When a permit is needed, we help with the paperwork.
25 to 30 years, when it is built right. The keys are a compacted base, proper thickness, reinforcement, and drainage for our clay soil.
The main cause is movement in the ground. Clay soil swells when wet and shrinks when dry. Heavy rain, tree roots, and a weak base can also cause cracks. Near Village Creek and other low, wet spots, damp ground can make the problem worse. Control joints, reinforcement, and a compacted base help reduce this risk.
Yes, often. Many Adamsville homes were built in the 1950s, 1960s, and 1970s, and their driveways have had decades of use. An old slab is often too worn or too thin to repair, so a full removal comes first. We look at the slab and tell you what is needed before we pour.
Yes, with the right mix and protection. We watch the forecast and use cold-weather methods when temperatures drop near freezing.
It depends on the damage. Small cracks and worn surfaces can often be repaired. A slab that has sunk a lot, or has large structural cracks, may need replacement. In Adamsville, the older homes near downtown often have driveways old enough to need a full replacement. We look at the slab first and give you an honest answer.
Yes. Every job starts with a free on-site visit and a written estimate. Call 205-584-0968.
Cracked driveway in Hillcrest Highlands? Sinking patio near Village Creek? Tell us what you see. We will tell you what it needs and what it costs.