Driveways, patios, slabs and repairs for Graysville homes and businesses, built for clay soil and damp ground near the creeks. We also work in the Main Street area, Alden, Fieldstown, Red Wine Hill, the Bankhead Highway corridor, the Lynndale Road area, and the Old Jasper Highway area. We are based in Hoover, a short drive from Graysville.
Graysville is the old Gin Town of northwest Jefferson County. In the late 1800s, it had the only cotton gin for miles around, so farmers came here from every direction, and a town grew up around it. It first became a city in 1897. In 1927, the town lost its charter for ‘inactivity,’ and it split into small communities called Alden, Red Wine Hill, and Fieldstown. In 1945, the area came back together as Graysville, mainly so it could run its own water system. The town built its water works in 1946 and its gas board in 1949. In the 1950s and 1960s, coal mines and steel mills brought families from all over Alabama, and Graysville built its first subdivisions. Today about 1,950 people live here. On January 23, 2012, an EF3 tornado damaged parts of the community, and Graysville rebuilt.
Graysville sits north of Adamsville, on U.S. Highway 78, also called Bankhead Highway. The highway runs right through town, with an I-22 interchange close by, and State Highway 5 runs north from here. The Locust Fork River, Cane Creek, and Fivemile Creek all cross the area. Most homes in Graysville are older, single-family homes on quiet streets, many from those first 1950s and 1960s subdivisions. The city keeps seven parks, with ball fields, walking tracks, picnic areas, and a canoe park, plus a community center with an indoor walking track. Every October there is a Fall Festival, and every December a Christmas Parade.
The ground here is the hard part. Graysville sits on clay-rich soil, like the rest of central Alabama. Clay swells when it gets wet. It shrinks when it dries out. That movement cracks driveways, sinks patios, and shifts slabs. Near the creeks and other low, wet spots, the ground can also stay damp, and heavy rain can wash out the ground under a slab.
We build for that ground. We check the soil and drainage first. We build a strong base. We add steel reinforcement. We plan for water. Then we pour.
You get the price in writing first. We list materials, labor and prep before work starts, with no surprise fees.
You get an honest answer. Some concrete can be repaired and some should be replaced. We will tell you which makes sense.
Call us and talk directly with the person who will look at your job.
Here are the jobs Graysville homeowners ask about most. Images are examples of the type of work.
Old, cracked driveways removed and replaced on a compacted base, with control joints and a broom finish for grip.
Simple concrete patios sized to your yard and graded so water drains away from your home.
When only part of the slab has failed, we can replace that section instead of the whole driveway.
Built on a compacted base to handle Alabama weather and daily use.
Patterns that mimic brick, stone or tile for patios, walkways and driveways.
Fixes for cracked or uneven surfaces when replacement is not needed.
Crack repair and stabilization, after we find out what is causing the movement.
Parking lots, sidewalks and floors for Graysville businesses.
Colors, textures and finishes that give plain concrete a custom look.
Solid front and backyard steps with even, comfortable rises.
Walkways for homes and businesses, graded so water runs off.
Clean cuts for openings, repairs and sections of old concrete.
Strong pavers that lock together for patios and driveways, laid on a firm base.
A good pour starts before any concrete arrives. Here is what we look at on every visit.
We look at the soil. We look at where water goes after rain. Near the creeks and other low, wet spots, the ground can stay damp. We plan where water should go, so it does not wash out the ground under the slab.
We compact the ground layer so it does not sink later. A weak base is a common cause of cracks.
Steel bars or mesh help the slab hold together when the ground moves.
These straight cuts give concrete a planned place to crack as it shrinks and moves.
Most patios, sidewalks and slabs are 4 inches thick. Trucks and large equipment need more.
Usually walk on it in 1 to 2 days and drive on it after about 7. Full strength takes about 28 days.
Slope and grade — Grade is how steep the ground is. A steep driveway needs a different plan than a flat one. We check the slope before we form the slab.
Typical planning ranges, not a quote.
Job
Per sq ft, installed
Plain driveway or patio, 4-inch slab
$6 to $12
Thicker reinforced slab, 5 to 6 inches
$8 to $16
Stamped or exposed aggregate
$10 to $24
What changes your price
The size of the area, ground prep, removal of old concrete, your finish, and any drainage work. Small jobs often cost more per square foot. Older slabs can also cost more, because removal takes extra work. In Graysville, many homes date back to the first subdivisions of the 1950s and 1960s, and their old driveways often need a full removal first.
How long it takes
Most small jobs take a few days once work begins. Larger jobs take longer. You get the timeline before we pour.
Call or send a message. We check the soil and slope, check drainage, and measure the area.
A clear price in writing, with no pressure to sign on the spot.
We prep, pour and finish, then allow for proper cure time.
We walk the job with you, clean up and explain how to care for it. We also show you the simple care: sweep it clean, seal it every 2 to 3 years, fix small cracks early, and do not park heavy loads on it before the cure time is over.
It depends on the job. We check with the City of Graysville at City Hall, at 246 South Main Street, about your address before we set a date. Driveways and patios are not named either way in the rules we found. When a permit is needed, we help with the paperwork.
25 to 30 years, when it is built right. The keys are a compacted base, proper thickness, reinforcement, and drainage for our clay soil.
The main cause is movement in the ground. Clay soil swells when wet and shrinks when dry. Heavy rain, tree roots, and a weak base can also cause cracks. Near the creeks and other low, wet spots, damp ground can make the problem worse. Control joints, reinforcement, and a compacted base help reduce this risk.
Yes, often. Many Graysville homes date back to the first subdivisions of the 1950s and 1960s, and their driveways have had decades of use. An old slab is often too worn or too thin to repair, so a full removal comes first. We look at the slab and tell you what is needed before we pour.
Yes, with the right mix and protection. We watch the forecast and use cold-weather methods when temperatures drop near freezing.
It depends on the damage. Small cracks and worn surfaces can often be repaired. A slab that has sunk a lot, or has large structural cracks, may need replacement. In Graysville, the older homes near Main Street often have driveways old enough to need a full replacement. We look at the slab first and give you an honest answer.
Yes. Every job starts with a free on-site visit and a written estimate. Call 205-584-0968.
Cracked driveway on Main Street? Sinking patio near Bankhead Highway? Tell us what you see. We will tell you what it needs and what it costs.